About This Amp

The Fender Twin Reverb Tonemaster is a modern digital recreation of the classic 1965 tube amp, offering the same tones at a fraction of the weight and with modern features like power scaling and USB recording.


No Sound? Check These First

Basic Connections

  • Is the power light on?
  • Is the OUTPUT POWER switch set to ON (not MUTE or STANDBY)?
  • Is your guitar cable securely connected to the correct channel input?
  • Are the volume knobs turned up? (Each channel has its own volume)
  • If using the XLR outputs, is the Cabinet Sim switch engaged?
  • Check if the POWER ATTENUATOR is set too low (affects overall volume)

Still No Sound?

  • Try a different guitar cable
  • Try the other channel (Normal or Vibrato)
  • Check if headphones are connected (this mutes the speakers)
  • Verify that the BALANCED OUTPUT LEVEL switch isn't set too low
  • Try a factory reset: Power off, hold the BRIGHT switch on Channel 1, power on

Sound Problems

Weak or Thin Sound

  • Check BASS, MIDDLE, and TREBLE settings
  • Set the POWER ATTENUATOR to full (5) for maximum headroom
  • Make sure BRIGHT switch isn't causing excessive treble
  • If using direct outputs, check BALANCED OUTPUT LEVEL isn't too low
  • Verify the CAB SIM is OFF if not needed

Distorted or Fuzzy (When Not Wanted)

  • Reduce channel volume
  • Check for clipping LED on the back panel
  • Try the other channel
  • Turn PRESENCE down if it sounds too harsh
  • Make sure guitar volume isn't too hot

Digital Artifacts or Unusual Sounds

  • Power cycle the amp completely (turn off for 30 seconds, then on)
  • Try a factory reset if problems persist
  • Check if a firmware update is available

Reverb or Tremolo Not Working

  • Is the reverb knob turned up?
  • Make sure a footswitch is properly connected to the FOOTSWITCH jack
  • Test the INTENSITY and SPEED controls for tremolo
  • Note: Tremolo only works on the Vibrato channel

Connection Issues

USB Recording Problems

  • Check USB cable connection
  • Verify your DAW recognizes the amp as an audio interface
  • Make sure DIRECT/MONITOR switch is set correctly for your needs
  • Try a different USB port or cable

XLR Direct Output Issues

  • Check if BALANCED OUTPUT LEVEL is turned up
  • Make sure CAB SIM is ON when connecting to a PA or interface
  • Verify XLR cables are working properly
  • Check GROUND LIFT switch if you hear buzzing

Power Issues

Won't Turn On

  • Check if it's plugged in
  • Try a different power outlet
  • Check the power cable for damage
  • Verify wall outlet has power

Unexpected Shutdowns

  • Ensure proper ventilation around the amp
  • Check if amp is in a hot environment
  • Make sure nothing is blocking the vents

When to Get Professional Help

  • If it makes unusual digital noises after a reset
  • If it won't power on after trying different outlets
  • If USB connectivity consistently fails
  • If it shuts down repeatedly despite proper ventilation
  • If display lights show unusual patterns

Tonemaster Twin Settings Cheat Sheet

For Pristine Cleans

  • Channel: Normal
  • Volume: 3-5
  • Treble: 6-7
  • Middle: 5-6
  • Bass: 4-5
  • Bright Switch: ON
  • POWER ATTENUATOR: 5 (full power)

For Edge-of-Breakup Tones

  • Channel: Vibrato
  • Volume: 7-8
  • Treble: 6
  • Middle: 5
  • Bass: 4
  • POWER ATTENUATOR: 2-3 (reduces headroom for earlier breakup)

For Recording Direct

  • Set BALANCED OUTPUT switch to LINE
  • Engage CAB SIM switch
  • Use Vibrato channel for effects
  • Set BALANCED OUTPUT LEVEL to suit your interface
  • Try both PRE and POST settings to taste

For Quiet Practice

  • Channel: Your preference
  • POWER ATTENUATOR: 1 (bedroom level)
  • Compensate by increasing Bass slightly
  • Increase Presence for clarity at low volumes
  • Consider using headphones for silent practice

Do you need more help with this?

  • You can contact us via our website chat icon, call us, or email info@grovestudios.space.

  • Our support team is available 24/7. If there is not an answer immediately, please leave a message describing your issue so the appropriate team member can call you back.